1. Cześć Gość. Przeglądasz forum dzięki firmie QNAP oraz zespołowi QNAP Club Polska.

Udzielamy pomocy DS 211 nie podnosi się poprawnie po fizycznym uszkodzeniu

Dyskusja w 'Cichociemni' rozpoczęta przez użytkownika bartoszw, 5 Grudzień 2016.

Ładowanie...
  1. bartoszw
    Offline

    bartoszw Nowy użytkownik Noobie

    Dołączył:
    5 Grudzień 2016
    Wiadomości:
    2
    Local Time:
    02:59
    Oceny:
    +0 / 0 / -0
    Followers:
    0
    QNAP:
    null
    Ethernet:
    null
    null null
    Stało się: zrzuciłem mojego DS 211 z biurka. Upadek z wysokości ok. 70 cm spowodował uszkodzenia 2 dysków i samego NASa.
    Dane udało się w 100% odzyskać - jest to temat na innego posta.
    Piszę tutaj, ponieważ wydaje mi się, że niewiele brakuje by uratować samego DS.

    Sytuacja wygląda następująco: NAS bootuje się, linux uruchamia się, sieć działa - ping do NASa odpowiada. Nie działa żadna inna usługa, żaden port nie jest otwarty.
    Próbowałem takich kroków:
    • bootować bez dysku i z nowym pustym.
    • Następnie wgrałem po tftp najnowszą wersję DSM (zImage + rd.bin)
    • i znowu próbowałem startować bez lub z nowym pustym dyskiem. Reagował tak samo. Tzn. widzał że dysku nie ma bądź jest niepoprawnie sformatowany.
    • Następnie zainstalowałem DSM na tym nowym dysku na innym NASie: DS 213+. Po włożeniu tego dysku z powrotem do DS 211 widzi go przy bootowaniu, że dysk jest OK, rozpoznaje partycje ale dalej brak dostępu przez sieć.
    Brak mi dalszych pomysłów.
    Wydaje się, że musi być jakiś błąd sprzętowy, z drugiej strony sieć zdaje się działać, skoro ping odpowiada.

    Kod (Text):
    1. DiskStation> netstat -a
    2. Active Internet connections (servers and established)
    3. Proto Recv-Q Send-Q Local Address          Foreign Address        State    
    4. udp        0      0 0.0.0.0:9997            0.0.0.0:*                        
    5. udp        0      0 0.0.0.0:9998            0.0.0.0:*                        
    6. udp        0      0 0.0.0.0:9999            0.0.0.0:*                        
    7. udp        0      0 0.0.0.0:1122            0.0.0.0:*                        
    8. Active UNIX domain sockets (servers and established)
    9. Proto RefCnt Flags      Type      State        I-Node Path
    10. unix  6      [ ]        DGRAM                      753 /var/run/log
    11. unix  2      [ ]        DGRAM                      1008
    12. unix  2      [ ]        DGRAM                      898
    13. unix  2      [ ]        DGRAM                      803
    14. unix  2      [ ]        DGRAM                      757
    Log z bootowania z dyskiem zainstalowanym poprawnie na innym NASie (DS213+):

    Kod (Text):
    1.       |  \/  | __ _ _ ____  _____| | |^M
    2.         | |\/| |/ _` | '__\ \ / / _ \ | |^M
    3.         | |  | | (_| | |  \ V /  __/ | |^M
    4.         |_|  |_|\__,_|_|    \_/ \___|_|_|^M
    5. _  _    ____              _^M
    6. | | | |  | __ )  ___  ___ | |_ ^M
    7. | | | |___|  _ \ / _ \ / _ \| __| ^M
    8. | |_| |___| |_) | (_) | (_) | |_ ^M
    9. \___/    |____/ \___/ \___/ \__|  ** LOADER **^M
    10. ** MARVELL BOARD: Synology Disk Station LE ^M
    11. ^M
    12. U-Boot 1.1.4 (Jun 29 2010 - 20:28:54) Marvell version: 3.5.3^M
    13. ^M
    14. U-Boot code: 00600000 -> 0067FFF0  BSS: -> 0068B3D4^M
    15. ^M
    16. Soc: 88F6282 A0CPU running @ 1600Mhz L2 running @ 533Mhz^M
    17. SysClock = 533Mhz , TClock = 200Mhz ^M
    18. ^M
    19. DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7^M
    20. DRAM CS[0] base 0x00000000  size 256MB ^M
    21. DRAM Total size 256MB  16bit width^M
    22. Addresses 8M - 0M are saved for the U-Boot usage.^M
    23. Mem malloc Initialization (8M - 7M): Done^M
    24. Using default environment^M
    25. ^M
    26. [4096kB@f8000000] Flash:  4 MB^M
    27. ^M
    28. CPU : Marvell Feroceon (Rev 1)^M
    29. ^M
    30. Streaming disabled ^M
    31. Write allocate disabled^M
    32. ^M
    33. ^M
    34. USB 0: host mode^M
    35. PEX 0: interface detected no Link.^M
    36. PEX 1: interface detected no Link.^M
    37. ^M
    38. Synology Model: DS211^M
    39. Fan Status: Good^M
    40. ^M
    41. Net:  egiga0 [PRIME], egiga1^M
    42. Hit any key to stop autoboot:  3 ^H^H^H 2 ^H^H^H 1 ^H^H^H 0 ^M
    43. ## Booting image at f8080000 ...^M
    44.   Image Name:  Linux-2.6.32.12^M
    45.   Image Type:  ARM Linux Kernel Image (uncompressed)^M
    46.   Data Size:    1552152 Bytes =  1.5 MB^M
    47.   Load Address: 00008000^M
    48.   Entry Point:  00008000^M
    49.   Verifying Checksum ... OK^M
    50. OK^M
    51. ## Loading Ramdisk Image at f8280000 ...^M
    52.   Image Name:  synology_88f6282_211 8451^M
    53.   Image Type:  ARM Linux RAMDisk Image (gzip compressed)^M
    54.   Data Size:    1029630 Bytes = 1005.5 kB^M
    55.   Load Address: 00800000^M
    56.   Entry Point:  00800000^M
    57.   Verifying Checksum ... OK^M
    58. ^M
    59. Starting kernel ...^M
    60. ^M
    61. Uncompressing Linux... done, booting the kernel.
    62. ^M[    0.000000] Linux version 2.6.32.12 (root@build4) (gcc version 4.6.4 (Marvell GCC release 20150204-c4af733b 64K MAXPAGESIZE ALIGN CVE-2015-0235) ) #8451 Wed Aug 17 05:12:01 CST 2016^M
    63. [    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977^M
    64. [    0.000000] CPU: VIVT data cache, VIVT instruction cache^M
    65. [    0.000000] Machine: Synology 6282 board^M
    66. [    0.000000] Using UBoot passing parameters structure^M
    67. [    0.000000] Sys Clk = 200000000, Tclk = 166666667^M
    68. [    0.000000] Synology Board ID: 23^M
    69. [    0.000000] Memory policy: ECC disabled, Data cache writeback^M
    70. [    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 65024^M
    71. [    0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x00800040,4M root=/dev/md0 rw syno_hw_version=DS211v10 ihd_num=2 netif_num=1^M
    72. [    0.000000] Synology Hardware Version: DS211v10-j^M
    73. [    0.000000] Internal HD num: 2^M
    74. [    0.000000] Internal netif num: 1^M
    75. [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)^M
    76. [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)^M
    77. [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)^M
    78. [    0.000000] Memory: 256MB = 256MB total^M
    79. [    0.000000] Memory: 244992KB available (3652K code, 519K data, 124K init, 0K highmem)^M
    80. [    0.000000] Hierarchical RCU implementation.^M
    81. [    0.000000] NR_IRQS:128^M
    82. [    0.000000] Console: colour dummy device 80x30^M
    83. [    0.000000] Calibrating delay loop... 1589.24 BogoMIPS (lpj=7946240)^M
    84. [    0.240000] Mount-cache hash table entries: 512^M
    85. [    0.240000] CPU: Testing write buffer coherency: ok^M
    86. [    0.240000] devtmpfs: initialized^M
    87. [    0.240000] xor: measuring software checksum speed^M
    88. [    0.290000]    arm4regs  :  1448.400 MB/sec^M
    89. [    0.340000]    8regs    :  869.200 MB/sec^M
    90. [    0.390000]    32regs    :  1122.000 MB/sec^M
    91. [    0.390000] xor: using function: arm4regs (1448.400 MB/sec)^M
    92. [    0.390000] NET: Registered protocol family 16^M
    93. [    0.390000] Feroceon L2: Enabling L2^M
    94. [    0.390000] Feroceon L2: Cache support initialised, in WT override mode.^M
    95. [    0.410000] ^M
    96. [    0.410000] CPU Interface^M
    97. [    0.410000] -------------^M
    98. [    0.410000] SDRAM_CS0 ....base 00000000, size 256MB ^M
    99. [    0.410000] SDRAM_CS1 ....disable^M
    100. [    0.410000] SDRAM_CS2 ....disable^M
    101. [    0.410000] SDRAM_CS3 ....disable^M
    102. [    0.410000] PEX0_MEM ....base e0000000, size 128MB ^M
    103. [    0.410000] PEX0_IO ....base f2000000, size  1MB ^M
    104. [    0.410000] PEX1_MEM ....base e8000000, size 128MB ^M
    105. [    0.410000] PEX1_IO ....base f2100000, size  1MB ^M
    106. [    0.410000] INTER_REGS ....base f1000000, size  1MB ^M
    107. [    0.410000] NFLASH_CS ....base fa000000, size  2MB ^M
    108. [    0.410000] SPI_CS ....base f4000000, size  16MB ^M
    109. [    0.410000] BOOT_ROM_CS ....no such^M
    110. [    0.410000] DEV_BOOTCS ....no such^M
    111. [    0.410000] CRYPT_ENG ....base f0000000, size  2MB ^M
    112. [    0.410000]  Detected Tclk 200000000 and SysClk 533333333 ^M
    113. [    0.410000] Synology 6282 1, 2 bay GPIO Init^M
    114. [    0.910000] PEX0 interface detected no Link.^M
    115. [    1.410000] PEX1 interface detected no Link.^M
    116. [    1.410000] PCI: bus0: Fast back to back transfers enabled^M
    117. [    1.410000] PCI: bus1: Fast back to back transfers enabled^M
    118. [    1.420000] bio: create slab <bio-0> at 0^M
    119. [    1.420000] vgaarb: loaded^M
    120. [    1.420000] SCSI subsystem initialized^M
    121. [    1.590000] raid6: int32x1    126 MB/s^M
    122. [    1.760000] raid6: int32x2    185 MB/s^M
    123. [    1.930000] raid6: int32x4    180 MB/s^M
    124. [    2.100000] raid6: int32x8    193 MB/s^M
    125. [    2.100000] raid6: using algorithm int32x8 (193 MB/s)^M
    126. [    2.100000] Switching to clocksource kw_clocksource^M
    127. [    2.100000] NET: Registered protocol family 2^M
    128. [    2.100000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)^M
    129. [    2.100000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)^M
    130. [    2.100000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)^M
    131. [    2.100000] TCP: Hash tables configured (established 8192 bind 8192)^M
    132. [    2.100000] TCP reno registered^M
    133. [    2.100000] NET: Registered protocol family 1^M
    134. [    2.100000] RPC: Registered udp transport module.^M
    135. [    2.100000] RPC: Registered tcp transport module.^M
    136. [    2.100000] RPC: Registered tcp NFSv4.1 backchannel transport module.^M
    137. [    2.100000] Trying to unpack rootfs image as initramfs...^M
    138. [    3.090000] rootfs image is not initramfs (no cpio magic); looks like an initrd^M
    139. [    3.100000] Freeing initrd memory: 4096K^M
    140. [    3.100000] XOR registered 4 channels^M
    141. [    3.100000] XOR 2nd invalidate WA enabled^M
    142. [    3.100000] VFS: Disk quotas dquot_6.5.2^M
    143. [    3.100000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)^M
    144. [    3.100000] msgmni has been set to 486^M
    145. [    3.100000] alg: No test for md5 (md5-generic)^M
    146. [    3.100000] alg: No test for des (des-generic)^M
    147. [    3.100000] alg: No test for des3_ede (des3_ede-generic)^M
    148. [    3.100000] alg: No test for stdrng (krng)^M
    149. [    3.100000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)^M
    150. [    3.100000] io scheduler noop registered^M
    151. [    3.100000] io scheduler anticipatory registered (default)^M
    152. [    3.110000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled^M
    153. [    3.110000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A^M
    154. [    3.120000] console [ttyS0] enabled^M
    155. [    3.120000] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A^M
    156. [    3.130000] brd: module loaded^M
    157. [    3.140000] sata_mv sata_mv.0: version 1.28^M
    158. [    3.140000] sata_mv sata_mv.0: slots 32 ports 2^M
    159. [    3.150000] scsi0 : sata_mv^M
    160. [    3.150000] scsi1 : sata_mv^M
    161. [    3.150000] ata1: SATA max UDMA/133 irq 21^M
    162. [    3.160000] ata2: SATA max UDMA/133 irq 21^M
    163. [    3.670000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)^M
    164. [    3.730000] ata1.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133^M
    165. [    3.730000] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)^M
    166. [    3.780000] ata1.00: configured for UDMA/133^M
    167. [    3.800000] scsi 0:0:0:0: Direct-Access    WDC      WD20EARS-00MVWB0        51.0 PQ: 0 ANSI: 5^M
    168. [    3.800000] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)^M
    169. [    3.810000] sd 0:0:0:0: [sda] Write Protect is off^M
    170. [    3.820000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA^M
    171. [    3.830000]  sda: sda1 sda2 sda3 < sda5 >^M
    172. [    3.860000] sd 0:0:0:0: [sda] Attached SCSI disk^M
    173. [    6.860000] Delay 5 seconds to wait for disk 2 ready.^M
    174. [  12.210000] ata2: SATA link down (SStatus 0 SControl F300)^M
    175. [  12.210000] physmap platform flash device: 00400000 at f8000000^M
    176. [  12.220000] SPI Serial flash detected @ 0xf8000000, 4096KB (64sec x 64KB)^M
    177. [  12.230000] Searching for RedBoot partition table in SYNOMTD-0 at offset 0x3f0000^M
    178. [  12.240000] 6 RedBoot partitions found on MTD device SYNOMTD-0^M
    179. [  12.240000] SYNOMTD flash bank 0: Using RedBoot partition definition^M
    180. [  12.250000] Creating 6 MTD partitions on "SYNOMTD-0":^M
    181. [  12.260000] 0x000000000000-0x000000080000 : "RedBoot"^M
    182. [  12.260000] 0x000000080000-0x000000280000 : "zImage"^M
    183. [  12.270000] 0x000000280000-0x0000003c0000 : "rd.gz"^M
    184. [  12.270000] 0x0000003c0000-0x0000003d0000 : "vendor"^M
    185. [  12.280000] vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0.^M
    186. [  12.280000] vender Mac2 checksum error ucSum:0x00 Buf:0x00 Sum:0.^M
    187. [  12.290000] vender Mac3 checksum error ucSum:0x00 Buf:0x00 Sum:0.^M
    188. [  12.300000] serial number='B7H1N00418'^M
    189. [  12.300000] 0x0000003d0000-0x0000003f0000 : "RedBoot Config"^M
    190. [  12.310000] 0x0000003f0000-0x000000400000 : "FIS directory"^M
    191. [  12.310000] SPI Serial flash detected @ 0xf4000000, 4096KB (64sec x 64KB)^M
    192. [  12.320000] cmdlinepart partition parsing not available^M
    193. [  12.330000] Loading Marvell Ethernet Driver:^M
    194. [  12.330000]  o Cached descriptors in DRAM^M
    195. [  12.340000]  o DRAM SW cache-coherency^M
    196. [  12.340000]  o 2 Giga ports supported^M
    197. [  12.340000]  o Single RX Queue support - ETH_DEF_RXQ=0^M
    198. [  12.350000]  o Single TX Queue support - ETH_DEF_TXQ=0^M
    199. [  12.350000]  o TCP segmentation offload (TSO) supported^M
    200. [  12.360000]  o Receive checksum offload supported^M
    201. [  12.360000]  o Transmit checksum offload supported^M
    202. [  12.370000]  o SKB Recycle supported - (Enabled)^M
    203. [  12.370000]  o Rx descripors: q0=128^M
    204. [  12.380000]  o Tx descripors: q0=532^M
    205. [  12.380000]  o Loading network interface(s):^M
    206. [  12.390000]    o  register under mv88fx_eth platform^M
    207. [  12.390000]    o eth0, ifindex = 2, GbE port = 0^M
    208. [  12.400000]    o eth0, phy chipid = 1410e40, Support WOL = 0^M
    209. [  12.400000] ^M
    210. [  12.400000] md: linear personality registered for level -1^M
    211. [  12.410000] md: raid0 personality registered for level 0^M
    212. [  12.420000] md: raid1 personality registered for level 1^M
    213. [  12.420000] md: raid10 personality registered for level 10^M
    214. [  12.430000] md: raid6 personality registered for level 6^M
    215. [  12.430000] md: raid5 personality registered for level 5^M
    216. [  12.440000] md: raid4 personality registered for level 4^M
    217. [  12.440000] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com^M
    218. [  12.450000] cpuidle: using governor ladder^M
    219. [  12.460000] TCP cubic registered^M
    220. [  12.460000] NET: Registered protocol family 17^M
    221. [  12.460000] NET: Registered protocol family 15^M
    222. [  12.470000] registered taskstats version 1^M
    223. [  12.470000] md: Waiting for all devices to be available before autodetect^M
    224. [  12.480000] md: If you don't use raid, use raid=noautodetect^M
    225. [  12.490000] md: Autodetecting RAID arrays.^M
    226. [  12.540000] md: invalid raid superblock magic on sda5^M
    227. [  12.550000] md: sda5 does not have a valid v0.90 superblock, not importing!^M
    228. [  12.550000] md: Scanned 3 and added 2 devices.^M
    229. [  12.560000] md: autorun ...^M
    230. [  12.560000] md: considering sda1 ...^M
    231. [  12.560000] md:  adding sda1 ...^M
    232. [  12.570000] md: sda2 has different UUID to sda1^M
    233. [  12.570000] md: created md0^M
    234. [  12.570000] md: bind<sda1>^M
    235. [  12.580000] md: running: <sda1>^M
    236. [  12.580000] raid1: raid set md0 active with 1 out of 2 mirrors^M
    237. [  12.590000] md0: detected capacity change from 0 to 2549940224^M
    238. [  12.590000] md: considering sda2 ...^M
    239. [  12.600000] md:  adding sda2 ...^M
    240. [  12.600000] md: created md1^M
    241. [  12.600000] md: bind<sda2>^M
    242. [  12.600000] md: running: <sda2>^M
    243. [  12.610000] raid1: raid set md1 active with 1 out of 2 mirrors^M
    244. [  12.610000] md1: detected capacity change from 0 to 2147418112^M
    245. [  12.620000] md: ... autorun DONE.^M
    246. [  12.620000] RAMDISK: lzma image found at block 0^M
    247. [  13.690000] VFS: Mounted root (ext2 filesystem) on device 1:0.^M
    248. START /linuxrc.syno^M
    249. Insert basic USB modules...^M
    250. :: Loading module usbcore[  13.930000] usbcore: registered new interface driver usbfs^M
    251. [  13.930000] usbcore: registered new interface driver hub^M
    252. [  13.960000] usbcore: registered new interface driver ethub^M
    253. [  13.960000] usbcore: registered new device driver usb^M
    254. ... [  OK  ]^M
    255. :: Loading module ehci-hcd[  14.020000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver^M
    256. [  14.030000] orion-ehci orion-ehci.0: Marvell Orion EHCI^M
    257. [  14.030000] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1^M
    258. [  14.070000] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000^M
    259. [  14.090000] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00^M
    260. [  14.090000] usb usb1: configuration #1 chosen from 1 choice^M
    261. [  14.120000] hub 1-0:1.0: USB hub found^M
    262. [  14.120000] hub 1-0:1.0: 1 port detected^M
    263. ... [  OK  ]^M
    264. :: Loading module ohci-hcd[  14.220000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver^M
    265. ... [  OK  ]^M
    266. :: Loading module xhci-hcd ... [  OK  ]^M
    267. :: Loading module etxhci-hcd ... [  OK  ]^M
    268. Insert net driver(Mindspeed only)...^M
    269. [  14.360000] ds211_synobios: module license 'Synology Inc.' taints kernel.^M
    270. [  14.370000] Disabling lock debugging due to kernel taint^M
    271. [  14.400000] correction with 0x03^M
    272. [  14.490000] 2016-11-24 20:46:55 UTC^M
    273. [  14.490000] synobios: load, major number 201^M
    274. [  14.500000] Brand: Synology^M
    275. [  14.500000] Model: DS-211^M
    276. [  14.500000] This is default settings: set group disks wakeup number to 1, spinup time deno 1^M
    277. [  14.510000] synobios cpu_arch proc entry initialized^M
    278. [  14.520000] synobios crypto_hw proc entry initialized^M
    279. [  14.520000] synobios syno_platform proc entry initialized^M
    280. [  14.530000] usb 1-1: new high speed USB device using orion-ehci and address 2^M
    281. Starting /usr/syno/bin/synocfgen...^M
    282. /usr/syno/bin/synocfgen returns 0^M
    283. [  14.570000] synobios: unload^M
    284. Partition Version=8^M
    285. /sbin/e2fsck exists, checking /dev/md0... ^M
    286. [  14.610000]  md0: unknown partition table^M
    287. [  14.700000] Got empty serial number. Generate serial number from product.^M
    288. [  14.710000] usb 1-1: configuration #1 chosen from 1 choice^M
    289. [  14.710000] hub 1-1:1.0: USB hub found^M
    290. [  14.740000] hub 1-1:1.0: 4 ports detected^M
    291. 1.42.6-8438: |==                                              |  3.7%  ^M
    292. 1.42.6-8438: |====                                            /  7.4%  ^M
    293. 1.42.6-8438: |=====                                          - 11.1%  ^M
    294. 1.42.6-8438: |====================================            \ 75.2%  ^M
    295. 1.42.6-8438: |=========================================      | 86.4%  ^M
    296. 1.42.6-8438: |============================================    / 92.2%  ^M
    297. 1.42.6-8438: |==============================================  - 95.4%  ^M
    298. 1.42.6-8438: |=============================================== \ 97.2%  ^M
    299. 1.42.6-8438: |================================================| 100.0%  ^M
    300.                                                                               ^M
    301.                                                                               ^M
    302.       26134 inodes used (16.79%, out of 155648)^M
    303.           15 non-contiguous files (0.1%)^M
    304.           9 non-contiguous directories (0.0%)^M
    305.             # of inodes with ind/dind/tind blocks: 0/0/0^M
    306.             Extent depth histogram: 23570/1^M
    307.       199646 blocks used (32.07%, out of 622544)^M
    308.           0 bad blocks^M
    309.           1 large file^M
    310. ^M
    311.       20563 regular files^M
    312.         2717 directories^M
    313.           2 character device files^M
    314.           0 block device files^M
    315.           0 fifos^M
    316.         1315 links^M
    317.         2843 symbolic links (2553 fast symbolic links)^M
    318.           0 sockets^M
    319. ------------^M
    320.       27440 files^M
    321. /sbin/e2fsck returns 0^M
    322. Mounting /dev/md0 /tmpRoot^M
    323. [  15.890000] EXT4-fs (md0): barriers disabled^M
    324. [  15.910000] EXT4-fs (md0): mounted filesystem with ordered data mode^M
    325. ------------upgrade^M
    326. Begin upgrade procedure^M
    327. No upgrade file exists^M
    328. End upgrade procedure^M
    329. ============upgrade^M
    330. Exit on error [4] Unique not match...^M
    331. Thr Nov 24 20:46:56 UTC 2016^M
    332. /dev/md0 /tmpRoot ext4 rw,relatime,user_xattr,barrier=0,journal_checksum,data=ordered 0 0^M
    333. sys /sys sysfs rw,relatime 0 0^M
    334. /dev/root.old / ext2 rw,relatime,errors=continue,user_xattr 0 0^M
    335. none /dev devtmpfs rw,relatime,size=122604k,nr_inodes=30651,mode=755 0 0^M
    336. proc /proc proc rw,relatime 0 0^M
    337. ^Mlinuxrc.syno failed on 4^M
    338. ^Mstarting pid 640, tty '': '/etc/rc'^M
    339. :: Starting /etc/rc^M
    340. :: Mounting procfs ... [  OK  ]^M
    341. :: Mounting tmpfs ... [  OK  ]^M
    342. :: Mounting devtmpfs ... [  OK  ]^M
    343. :: Mounting devpts ... [  OK  ]^M
    344. :: Mounting sysfs ... [  OK  ]^M
    345. rc: Use all internal disk as swap.^M
    346. /etc/rc: line 107: /usr/syno/bin/synodiskpathparse: not[  16.350000]  md1: found^M
    347. /etc/rc: line 107: awk: not found^M
    348. rc: Failed to parse partition sda2^M
    349. unknown partition table^M
    350. [  16.400000] Adding 2097080k swap on /dev/md1.  Priority:-1 extents:1 across:2097080k ^M
    351. :: Loading module fat ... [  OK  ]^M
    352. :: Loading module vfat ... [  OK  ]^M
    353. :: Mounting usbfs ... [  OK  ]^M
    354. :: Loading module sky2[  16.940000] sky2 driver version 1.25^M
    355. ... [  OK  ]^M
    356. :: Loading module synobios[  17.020000] correction with 0x03^M
    357. [  17.120000] 2016-11-24 20:46:58 UTC^M
    358. [  17.120000] synobios: load, major number 201^M
    359. [  17.130000] Brand: Synology^M
    360. [  17.130000] Model: DS-211^M
    361. [  17.130000] This is default settings: set group disks wakeup number to 1, spinup time deno 1^M
    362. [  17.140000] synobios cpu_arch proc entry initialized^M
    363. [  17.140000] synobios crypto_hw proc entry initialized^M
    364. [  17.150000] synobios syno_platform proc entry initialized^M
    365. ... [  OK  ]^M
    366. cat: can't open '/proc/sys/kernel/syno_skip_vender_mac_interfaces': No such file[  17.370000] eth0: mac address changed^M
    367. or directory^M
    368. [  19.410000] eth0: link down^M
    369. [  19.410000] eth0: started^M
    370. udhcpc (v1.16.1) started^M
    371. eth0      Link encap:Ethernet  HWaddr 00:11:32:0D:4C:20  ^M
    372.           UP BROADCAST MULTICAST  MTU:1500  Metric:1^M
    373.           RX packets:0 errors:0 dropped:0 overruns:0 frame:0^M
    374.           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0^M
    375.           collisions:0 txqueuelen:532 ^M
    376.           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)^M
    377.           Interrupt:11 ^M
    378. ^M
    379. lo        Link encap:Local Loopback  ^M
    380.           inet addr:127.0.0.1  Mask:255.0.0.0^M
    381.           UP LOOPBACK RUNNING  MTU:16436  Metric:1^M
    382.           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    383.           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    384.           collisions:0 txqueuelen:0
    385.  
    Sieć wydaje się działać:
    Kod (Text):
    1. DiskStation> ifconfig^M
    2. eth0      Link encap:Ethernet  HWaddr 00:11:32:0D:4C:20  ^M
    3.           inet addr:192.168.2.51  Bcast:192.168.2.255  Mask:255.255.255.0^M
    4.           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1^M
    5.           RX packets:7296 errors:0 dropped:0 overruns:0 frame:0^M
    6.           TX packets:5350 errors:0 dropped:0 overruns:0 carrier:0^M
    7.           collisions:0 txqueuelen:532 ^M
    8.           RX bytes:541714 (529.0 KiB)  TX bytes:296318 (289.3 KiB)^M
    9.           Interrupt:11 ^M
    10. ^M
    11. lo        Link encap:Local Loopback  ^M
    12.           inet addr:127.0.0.1  Mask:255.0.0.0^M
    13.           UP LOOPBACK RUNNING  MTU:16436  Metric:1^M
    14.           RX packets:0 errors:0 dropped:0 overruns:0 frame:0^M
    15.           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0^M
    16.           collisions:0 txqueuelen:0 ^M
    17.           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)^M
    18.  
    Nawet port USB działa można zamontować dysk zewnętrzny
    Kod (Text):
    1. [  326.890000] usb 1-1.3: new high speed USB device using orion-ehci and address 3^M
    2. [  327.380000] usb 1-1.3: device descriptor read/64, error -71^M
    3. [  327.600000] usb 1-1.3: configuration #1 chosen from 1 choice^M
    4. [  327.600000] scsi2 : SCSI emulation for USB Mass Storage devices^M
    5. [  332.750000] scsi 2:0:0:0: Direct-Access    WD      My Passport 0810        1042 PQ: 0 ANSI: 6^M
    6. [  332.770000] scsi 2:0:0:1: Enclosure        WD      SES Device              1042 PQ: 0 ANSI: 6^M
    7. [  332.780000] sd 2:0:0:0: [sdq] 976707584 512-byte logical blocks: (500 GB/465 GiB)^M
    8. [  332.840000] sd 2:0:0:0: [sdq] Write Protect is off^M
    9. [  332.840000] sd 2:0:0:0: [sdq] Assuming drive cache: write through^M
    10. [  332.870000] sd 2:0:0:0: [sdq] Assuming drive cache: write through^M
    11. [  332.870000]  sdq: sdq1^M
    12. [  332.880000] sd 2:0:0:0: [sdq] Assuming drive cache: write through^M
    13. [  332.890000] sd 2:0:0:0: [sdq] Attached SCSI disk^M
    14. [  399.800000] eth0: link down^M
    15. [  424.890000] eth0: link up, full duplex, speed 1 Gbps^M
    16. [  607.480000] usb 1-1.3: USB disconnect, address 3^M
    17.  
    Koniec końców, powtórzę, żadna usługa nie jest otwarta, żaden port, można tylko dostać się po porcie szeregowym.
    Za każdą pomoc będę wdzięczny.
    pozdrawiam
     
  2. Przemuss
    Offline

    Przemuss Master+ Architect Q's Excellence

    Dołączył:
    11 Październik 2011
    Wiadomości:
    2 011
    Miejscowość:
    Żyrardów
    Local Time:
    02:59
    Oceny:
    +36 / 0 / -0
    Followers:
    3
    QNAP:
    null
    Synology:
    DS211j; DS1511+; RS2212RP+
    Ethernet:
    1 GbE
    null 1 GbE
    Porty SATA w żaden sposób nie zostały uszkodzone? DSM próbujesz wgrać dokładnie takie samo jakie było przed upadkiem?
    Sądzę że jest gdzieś zimny lut. Gołym okiem ciężko go dostrzec. Jak masz trochę wprawy i lutownicę grotową z bardzo małym grotem możesz przelecieć wszystkie luty. Jedynie nie pomożesz układom scalonym... chociaż.... piekłeś kiedyś kartę graficzną? Wielu było zadowolonych z pichcenia.
     
  3. bartoszw
    Offline

    bartoszw Nowy użytkownik Noobie

    Dołączył:
    5 Grudzień 2016
    Wiadomości:
    2
    Local Time:
    02:59
    Oceny:
    +0 / 0 / -0
    Followers:
    0
    QNAP:
    null
    Ethernet:
    null
    null null
    Dysk i partycje są rozpoznawane poprawnie. Wnioskuję z tego, że porty SATA są w porządku.
    DSM miałem po upadku taki jak przed, ale ponieważ nie działał, wgrałem najnowszy, zdecydowanie inny niż miałem poprzednio. Wydaje mi się, że to nie powinno być problemem.
    Niestety nie mam żadnego doświadczenia z lutowaniem, oprócz paru dziecięcych doświadczeń wiele lat temu. Nie podejmę się tego. Jeśli jest to ostatnia deska ratunku, to może poszukam kogoś, kto ma ochotę, ale raczej nie, bo sprawa jest nieopłacalna.
    O pieczeniu kart graficznych nie słyszałem, poczytam sobie.
    Dzięki za podpowiedzi, pozdrawiam.

    PS. Dla porównania, wrzucam jeszcze log z bootowania bez żadnego dysku. Nie widzę tam nic nadzwyczajnego oprócz błędów braku dysku. Mimo to powinien otworzyć porty/servis o ile się orientuję.

    Kod (Text):
    1.         |  \/  | __ _ _ ____   _____| | |
    2.         | |\/| |/ _` | '__\ \ / / _ \ | |
    3.         | |  | | (_| | |   \ V /  __/ | |
    4.         |_|  |_|\__,_|_|    \_/ \___|_|_|
    5.  _   _     ____              _
    6. | | | |   | __ )  ___   ___ | |_  
    7. | | | |___|  _ \ / _ \ / _ \| __|  
    8. | |_| |___| |_) | (_) | (_) | |_  
    9.  \___/    |____/ \___/ \___/ \__|  ** LOADER **
    10.  ** MARVELL BOARD: Synology Disk Station LE  
    11. U-Boot 1.1.4 (Jun 29 2010 - 20:28:54) Marvell version: 3.5.3
    12. U-Boot code: 00600000 -> 0067FFF0  BSS: -> 0068B3D4
    13. Soc: 88F6282 A0CPU running @ 1600Mhz L2 running @ 533Mhz
    14. SysClock = 533Mhz , TClock = 200Mhz  
    15. DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
    16. DRAM CS[0] base 0x00000000   size 256MB  
    17. DRAM Total size 256MB  16bit width
    18. Addresses 8M - 0M are saved for the U-Boot usage.
    19. Mem malloc Initialization (8M - 7M): Done
    20. Using default environment
    21. [4096kB@f8000000] Flash:  4 MB
    22. CPU : Marvell Feroceon (Rev 1)
    23. Streaming disabled  
    24. Write allocate disabled
    25. USB 0: host mode
    26. PEX 0: interface detected no Link.
    27. PEX 1: interface detected no Link.
    28. Synology Model: DS211
    29. Fan Status: Good
    30. Net:   egiga0 [PRIME], egiga1
    31. Hit any key to stop autoboot:  3 ^H^H^H 2 ^H^H^H 1 ^H^H^H 0  
    32. ## Booting image at f8080000 ...
    33.    Image Name:   Linux-2.6.32.12
    34.    Image Type:   ARM Linux Kernel Image (uncompressed)
    35.    Data Size:    1552152 Bytes =  1.5 MB
    36.    Load Address: 00008000
    37.    Entry Point:  00008000
    38.    Verifying Checksum ... OK
    39. OK
    40. ## Loading Ramdisk Image at f8280000 ...
    41.    Image Name:   synology_88f6282_211 8451
    42.    Image Type:   ARM Linux RAMDisk Image (gzip compressed)
    43.    Data Size:    1029630 Bytes = 1005.5 kB
    44.    Load Address: 00800000
    45.    Entry Point:  00800000
    46.    Verifying Checksum ... OK
    47. Starting kernel ...
    48. Uncompressing Linux... done, booting the kernel.
    49.  [    0.000000] Linux version 2.6.32.12 (root@build4) (gcc version 4.6.4 (Marvell GCC release 20150204-c4af733b 64K MAXPAGESIZE ALIGN CVE-2015-0235) ) #8451 Wed Aug 17 05:12:01 CST 2016
    50. [    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
    51. [    0.000000] CPU: VIVT data cache, VIVT instruction cache
    52. [    0.000000] Machine: Synology 6282 board
    53. [    0.000000] Using UBoot passing parameters structure
    54. [    0.000000] Sys Clk = 200000000, Tclk = 166666667
    55. [    0.000000] Synology Board ID: 23
    56. [    0.000000] Memory policy: ECC disabled, Data cache writeback
    57. [    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 65024
    58. [    0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x00800040,4M root=/dev/md0 rw syno_hw_version=DS211v10 ihd_num=2 netif_num=1
    59. [    0.000000] Synology Hardware Version: DS211v10-j
    60. [    0.000000] Internal HD num: 2
    61. [    0.000000] Internal netif num: 1
    62. [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    63. [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    64. [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    65. [    0.000000] Memory: 256MB = 256MB total
    66. [    0.000000] Memory: 244992KB available (3652K code, 519K data, 124K init, 0K highmem)
    67. [    0.000000] Hierarchical RCU implementation.
    68. [    0.000000] NR_IRQS:128
    69. [    0.000000] Console: colour dummy device 80x30
    70. [    0.000000] Calibrating delay loop... 1589.24 BogoMIPS (lpj=7946240)
    71. [    0.240000] Mount-cache hash table entries: 512
    72. [    0.240000] CPU: Testing write buffer coherency: ok
    73. [    0.240000] devtmpfs: initialized
    74. [    0.240000] xor: measuring software checksum speed
    75. [    0.290000]    arm4regs  :  1448.400 MB/sec
    76. [    0.340000]    8regs     :   869.200 MB/sec
    77. [    0.390000]    32regs    :  1122.000 MB/sec
    78. [    0.390000] xor: using function: arm4regs (1448.400 MB/sec)
    79. [    0.390000] NET: Registered protocol family 16
    80. [    0.390000] Feroceon L2: Enabling L2
    81. [    0.390000] Feroceon L2: Cache support initialised, in WT override mode.
    82. [    0.410000]  
    83. [    0.410000] CPU Interface
    84. [    0.410000] -------------
    85. [    0.410000] SDRAM_CS0 ....base 00000000, size 256MB  
    86. [    0.410000] SDRAM_CS1 ....disable
    87. [    0.410000] SDRAM_CS2 ....disable
    88. [    0.410000] SDRAM_CS3 ....disable
    89. [    0.410000] PEX0_MEM ....base e0000000, size 128MB  
    90. [    0.410000] PEX0_IO ....base f2000000, size   1MB  
    91. [    0.410000] PEX1_MEM ....base e8000000, size 128MB  
    92. [    0.410000] PEX1_IO ....base f2100000, size   1MB  
    93. [    0.410000] INTER_REGS ....base f1000000, size   1MB  
    94. [    0.410000] NFLASH_CS ....base fa000000, size   2MB  
    95. [    0.410000] SPI_CS ....base f4000000, size  16MB  
    96. [    0.410000] BOOT_ROM_CS ....no such
    97. [    0.410000] DEV_BOOTCS ....no such
    98. [    0.410000] CRYPT_ENG ....base f0000000, size   2MB  
    99. [    0.410000]  Detected Tclk 200000000 and SysClk 533333333  
    100. [    0.410000] Synology 6282 1, 2 bay GPIO Init
    101. [    0.910000] PEX0 interface detected no Link.
    102. [    1.410000] PEX1 interface detected no Link.
    103. [    1.410000] PCI: bus0: Fast back to back transfers enabled
    104. [    1.410000] PCI: bus1: Fast back to back transfers enabled
    105. [    1.420000] bio: create slab <bio-0> at 0
    106. [    1.420000] vgaarb: loaded
    107. [    1.420000] SCSI subsystem initialized
    108. [    1.590000] raid6: int32x1    126 MB/s
    109. [    1.760000] raid6: int32x2    185 MB/s
    110. [    1.930000] raid6: int32x4    180 MB/s
    111. [    2.100000] raid6: int32x8    193 MB/s
    112. [    2.100000] raid6: using algorithm int32x8 (193 MB/s)
    113. [    2.100000] Switching to clocksource kw_clocksource
    114. [    2.100000] NET: Registered protocol family 2
    115. [    2.100000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
    116. [    2.100000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    117. [    2.100000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
    118. [    2.100000] TCP: Hash tables configured (established 8192 bind 8192)
    119. [    2.100000] TCP reno registered
    120. [    2.100000] NET: Registered protocol family 1
    121. [    2.100000] RPC: Registered udp transport module.
    122. [    2.100000] RPC: Registered tcp transport module.
    123. [    2.100000] RPC: Registered tcp NFSv4.1 backchannel transport module.
    124. [    2.100000] Trying to unpack rootfs image as initramfs...
    125. [    3.090000] rootfs image is not initramfs (no cpio magic); looks like an initrd
    126. [    3.100000] Freeing initrd memory: 4096K
    127. [    3.100000] XOR registered 4 channels
    128. [    3.100000] XOR 2nd invalidate WA enabled
    129. [    3.100000] VFS: Disk quotas dquot_6.5.2
    130. [    3.100000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    131. [    3.100000] msgmni has been set to 486
    132. [    3.100000] alg: No test for md5 (md5-generic)
    133. [    3.100000] alg: No test for des (des-generic)
    134. [    3.100000] alg: No test for des3_ede (des3_ede-generic)
    135. [    3.100000] alg: No test for stdrng (krng)
    136. [    3.100000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    137. [    3.100000] io scheduler noop registered
    138. [    3.100000] io scheduler anticipatory registered (default)
    139. [    3.110000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    140. [    3.110000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
    141. [    3.120000] console [ttyS0] enabled
    142. [    3.120000] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
    143. [    3.130000] brd: module loaded
    144. [    3.140000] sata_mv sata_mv.0: version 1.28
    145. [    3.140000] sata_mv sata_mv.0: slots 32 ports 2
    146. [    3.150000] scsi0 : sata_mv
    147. [    3.150000] scsi1 : sata_mv
    148. [    3.150000] ata1: SATA max UDMA/133 irq 21
    149. [    3.160000] ata2: SATA max UDMA/133 irq 21
    150. [    3.510000] ata1: SATA link down (SStatus 0 SControl F300)
    151. [    6.510000] Delay 5 seconds to wait for disk 2 ready.
    152. [   11.850000] ata2: SATA link down (SStatus 0 SControl F300)
    153. [   11.850000] physmap platform flash device: 00400000 at f8000000
    154. [   11.860000] SPI Serial flash detected @ 0xf8000000, 4096KB (64sec x 64KB)
    155. [   11.870000] Searching for RedBoot partition table in SYNOMTD-0 at offset 0x3f0000
    156. [   11.880000] 6 RedBoot partitions found on MTD device SYNOMTD-0
    157. [   11.880000] SYNOMTD flash bank 0: Using RedBoot partition definition
    158. [   11.890000] Creating 6 MTD partitions on "SYNOMTD-0":
    159. [   11.900000] 0x000000000000-0x000000080000 : "RedBoot"
    160. [   11.900000] 0x000000080000-0x000000280000 : "zImage"
    161. [   11.910000] 0x000000280000-0x0000003c0000 : "rd.gz"
    162. [   11.910000] 0x0000003c0000-0x0000003d0000 : "vendor"
    163. [   11.920000] vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0.
    164. [   11.920000] vender Mac2 checksum error ucSum:0x00 Buf:0x00 Sum:0.
    165. [   11.930000] vender Mac3 checksum error ucSum:0x00 Buf:0x00 Sum:0.
    166. [   11.940000] serial number='B7H1N00418'
    167. [   11.940000] 0x0000003d0000-0x0000003f0000 : "RedBoot Config"
    168. [   11.950000] 0x0000003f0000-0x000000400000 : "FIS directory"
    169. [   11.950000] SPI Serial flash detected @ 0xf4000000, 4096KB (64sec x 64KB)
    170. [   11.960000] cmdlinepart partition parsing not available
    171. [   11.970000] Loading Marvell Ethernet Driver:
    172. [   11.970000]   o Cached descriptors in DRAM
    173. [   11.980000]   o DRAM SW cache-coherency
    174. [   11.980000]   o 2 Giga ports supported
    175. [   11.980000]   o Single RX Queue support - ETH_DEF_RXQ=0
    176. [   11.990000]   o Single TX Queue support - ETH_DEF_TXQ=0
    177. [   11.990000]   o TCP segmentation offload (TSO) supported
    178. [   12.000000]   o Receive checksum offload supported
    179. [   12.000000]   o Transmit checksum offload supported
    180. [   12.010000]   o SKB Recycle supported - (Enabled)
    181. [   12.010000]   o Rx descripors: q0=128
    182. [   12.020000]   o Tx descripors: q0=532
    183. [   12.020000]   o Loading network interface(s):
    184. [   12.030000]     o  register under mv88fx_eth platform
    185. [   12.030000]     o eth0, ifindex = 2, GbE port = 0
    186. [   12.040000]     o eth0, phy chipid = 1410e40, Support WOL = 0
    187. [   12.040000]  
    188. [   12.040000] md: linear personality registered for level -1
    189. [   12.050000] md: raid0 personality registered for level 0
    190. [   12.060000] md: raid1 personality registered for level 1
    191. [   12.060000] md: raid10 personality registered for level 10
    192. [   12.070000] md: raid6 personality registered for level 6
    193. [   12.070000] md: raid5 personality registered for level 5
    194. [   12.080000] md: raid4 personality registered for level 4
    195. [   12.080000] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    196. [   12.090000] cpuidle: using governor ladder
    197. [   12.100000] TCP cubic registered
    198. [   12.100000] NET: Registered protocol family 17
    199. [   12.100000] NET: Registered protocol family 15
    200. [   12.110000] registered taskstats version 1
    201. [   12.110000] md: Waiting for all devices to be available before autodetect
    202. [   12.120000] md: If you don't use raid, use raid=noautodetect
    203. [   12.130000] md: Autodetecting RAID arrays.
    204. [   12.130000] md: Scanned 0 and added 0 devices.
    205. [   12.130000] md: autorun ...
    206. [   12.140000] md: ... autorun DONE.
    207. [   12.140000] RAMDISK: lzma image found at block 0
    208. [   13.200000] VFS: Mounted root (ext2 filesystem) on device 1:0.
    209. START /linuxrc.syno
    210. Insert basic USB modules...
    211. :: Loading module usbcore[   13.450000] usbcore: registered new interface driver usbfs
    212. [   13.460000] usbcore: registered new interface driver hub
    213. [   13.460000] usbcore: registered new interface driver ethub
    214. [   13.490000] usbcore: registered new device driver usb
    215.  ... [  OK  ]
    216. :: Loading module ehci-hcd[   13.540000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    217. [   13.540000] orion-ehci orion-ehci.0: Marvell Orion EHCI
    218. [   13.550000] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
    219. [   13.590000] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
    220. [   13.610000] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
    221. [   13.610000] usb usb1: configuration #1 chosen from 1 choice
    222. [   13.640000] hub 1-0:1.0: USB hub found
    223. [   13.640000] hub 1-0:1.0: 1 port detected
    224.  ... [  OK  ]
    225. :: Loading module ohci-hcd[   13.740000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    226.  ... [  OK  ]
    227. :: Loading module xhci-hcd ... [  OK  ]
    228. :: Loading module etxhci-hcd ... [  OK  ]
    229. Insert net driver(Mindspeed only)...
    230. [   13.880000] ds211_synobios: module license 'Synology Inc.' taints kernel.
    231. [   13.890000] Disabling lock debugging due to kernel taint
    232. [   13.920000] correction with 0x03
    233. [   14.010000] 2016-12-6 19:53:56 UTC
    234. [   14.010000] synobios: load, major number 201
    235. [   14.020000] Brand: Synology
    236. [   14.020000] Model: DS-211
    237. [   14.020000] This is default settings: set group disks wakeup number to 1, spinup time deno 1
    238. [   14.030000] synobios cpu_arch proc entry initialized
    239. [   14.040000] synobios crypto_hw proc entry initialized
    240. [   14.040000] synobios syno_platform proc entry initialized
    241. [   14.050000] usb 1-1: new high speed USB device using orion-ehci and address 2
    242. Starting /usr/syno/bin/synocfgen...
    243. /usr/syno/bin/synocfgen returns 0
    244. [   14.080000] synobios: unload
    245. Exit on error [1] DISK NOT INSTALLED...
    246. Tue Dec  6 19:53:56 UTC 2016
    247. sys /sys sysfs rw,relatime 0 0
    248. /dev/root.old / ext2 rw,relatime,errors=continue,user_xattr 0 0
    249. none /dev devtmpfs rw,relatime,size=122604k,nr_inodes=30651,mode=755 0 0
    250. proc /proc proc rw,relatime 0 0
    251.  linuxrc.syno failed on 1
    252.  starting pid 556, tty '': '/etc/rc'
    253. [   14.220000] Got empty serial number. Generate serial number from product.
    254. [   14.220000] usb 1-1: configuration #1 chosen from 1 choice
    255. [   14.250000] hub 1-1:1.0: USB hub found
    256. [   14.250000] hub 1-1:1.0: 4 ports detected
    257. :: Starting /etc/rc
    258. :: Mounting procfs ... [  OK  ]
    259. :: Mounting tmpfs ... [  OK  ]
    260. :: Mounting devtmpfs ... [  OK  ]
    261. :: Mounting devpts ... [  OK  ]
    262. :: Mounting sysfs ... [  OK  ]
    263. mdadm: error opening /dev/md1: No such file or directory
    264. rc: Use all internal disk as swap.
    265. rc: No internal disk installed.
    266. swapon: can't stat '/dev/md1': No such file or directory
    267. :: Loading module fat ... [  OK  ]
    268. :: Loading module vfat ... [  OK  ]
    269. :: Mounting usbfs ... [  OK  ]
    270. :: Loading module sky2[   14.980000] sky2 driver version 1.25
    271.  ... [  OK  ]
    272. :: Loading module synobios[   15.060000] correction with 0x03
    273. [   15.150000] 2016-12-6 19:53:57 UTC
    274. [   15.160000] synobios: load, major number 201
    275. [   15.160000] Brand: Synology
    276. [   15.160000] Model: DS-211
    277. [   15.170000] This is default settings: set group disks wakeup number to 1, spinup time deno 1
    278. [   15.170000] synobios cpu_arch proc entry initialized
    279. [   15.180000] synobios crypto_hw proc entry initialized
    280. [   15.180000] synobios syno_platform proc entry initialized
    281.  ... [  OK  ]
    282. cat: can't open '/proc/sys/kernel/syno_skip_vender_mac_interfaces': No such file[   15.400000] eth0: mac address changed
    283.  or directory
    284. [   17.440000] eth0: started
    285. udhcpc (v1.16.1) started
    286. eth0      Link encap:Ethernet  HWaddr 00:11:32:0D:4C:20  
    287.           UP BROADCAST MULTICAST  MTU:1500  Metric:1
    288.           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    289.           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    290.           collisions:0 txqueuelen:532  
    291.           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
    292.           Interrupt:11  
    293. lo        Link encap:Local Loopback  
    294.           inet addr:127.0.0.1  Mask:255.0.0.0
    295.           UP LOOPBACK RUNNING  MTU:16436  Metric:1
    296.           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    297.           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    298.           collisions:0 txqueuelen:0  
    299.           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
    300. :: Starting syslogd ... [  OK  ]
    301. :: Starting scemd
    302. :: Starting services in background
    303. Starting findhostd in flash_rd...
    304. Starting services in flash_rd...
    305. Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
    306. cat: can't open '/sys/block/sd*/device//model': No such file or directory
    307. Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
    308. :: Loading module usb-storage[   25.120000] Initializing USB Mass Storage driver...
    309. [   25.140000] usbcore: registered new interface driver usb-storage
    310. [   25.150000] USB Mass Storage support registered.
    311.  ... [  OK  ]
    312. ============ Date ============
    313. Tue Dec  6 19:54:07 UTC 2016
    314. ==Tue Dec  6 19:54:08 2016
    315.  
    316. DiskStation login: [   62.260000] eth0: link up, full duplex, speed 1 Gbps
    317. [   74.040000] eth0: stopped
    318. [   76.080000] eth0: link down
    319. [   76.080000] eth0: started
    320. [   77.740000] eth0: link up, full duplex, speed 1 Gbps
    321. [   79.100000] eth0: stopped
    322. [   79.100000] eth0: mac address changed
    323. [   81.110000] eth0: link down
    324. [   81.110000] eth0: started
    325. [   82.770000] eth0: link up, full duplex, speed 1 Gbps
    326. [  319.340000] synobios: power button pressed, ret = 0
     

Poleć tę stronę